Hodnocení uživatelů: 1 / 5

Aktivní hodnoceníNeaktivní hodnoceníNeaktivní hodnoceníNeaktivní hodnoceníNeaktivní hodnocení
 

Buell RSS 1200 Westwind

Na Buell Rally 2016 v Bechyni se objevil i tento vyjímečný a unikátní stroj, navíc s vlastnoručním podpisem Erika Buella.

 

Make Model.

Buell RSS 1200 Westwind

Year

1991 - 93

Engine

45° V-Twin, four stroke, pushrod actuated overhead valve, hydraulic self-adjusting lifters, 2 valve per cylinder.

Capacity

1198 cc / 73.1 cub in.

Bore x Stroke

88.9 x 98.8 mm

Compression Ratio

9.0:1

Cooling System

Air cooled

Induction

40mm Keihin carb

Starting

Electric

Max Power

45.5 kW / 61 hp @ 55 rpm

Transmission

5 Speed

Final Drive

Chain

Rake

Ladder style steel tubes with unique anti vibration system

Rake

25°

Trail

99 mm / 3.9 in.

Seat Height

787 mm / 31 in.

Front Suspension

Telescopic forks, adjustable compression and rebound damping

Front Wheel Travel

109 mm / 4.3 in.

Rear Suspension

Single shock, adjustable compression and rebound damping, spring preload

Rear Wheel Travel

124 mm / 4.9 in.

Front Brakes

2 x Discs

Rear Brakes

Single disc

Front Tyre

120/60 VB17

Rear Tyre

170/70 VB17

Dry Weight

215 kg / 474 lbs

Wet Weight

225 kg / 495 lbs

Fuel Capacity 

13.5 Litres / 3.6 US gal

Consumption  average

6.0 L/100 km / 16.6 km/l / 39 US mpg

Braking 48 km/h / 30 mph - 0

7.6 m / 25 ft

Braking 97 km/h / 60 mph - 0

33.8 m / 111 ft

Standing ¼ Mile  

12.42 sec / 174.8 km/h / 109 mph

Acelleration 0 - 97 km/h / 60 mph

4.2 sec

Acelleration 0 - 161 km/h / 100 mph

10.9 sec

Top Speed

199.6 km/h / 124 mph

Harley-Davidson's traditional concentration cruisers and tourers has, over the years, led many smaller firms to produce sports bikes powered by the Milwaukee company's trademark V-twin engine. Most successful has been Erik Buell, a former road-racer and Harley engineer, whose series of innovative bikes have justified Buell's slogan: 'America's Faaast Motorcycle'.

Buell's first model, the RR1000, combined a tuned V-twin powerplant and lightweight chassis with aerodynamic, all-enveloping bodywork that boosted straight-line speed. The RR was successful in twin-cylinder racing, and made a swift and singleminded road bike too. Trouble was, nobody could tell its engine was a Harley unit - so in 1989 Buell produced a new model called the RSI200. 

The RS featured broadly similar engineering to the RR, but the fully-enclosed bodywork was gone. Instead there was a sleekly integrated half-fairing, which put on display not only the all-important 1200 Sportster powerplant, but also the ingenious chassis that had also previously been buried behind fibreglass.

Buell's 'Uniplanar' frame design combined a Ducati-style ladder of slender steel tubes with a unique anti-vibration system. Four adjustable rods, each joining engine and frame, restricted the 45-degree V-twin motor's shaking to the vertical plane only. The design added engine stiffness to the chassis without passing vibration to the rider.

Other chassis details were equally clever, notably the RS1200's Marzocchi forks, which were fitted with Buell's own anti-dive system. The Works Performance rear shock unit was placed horizontally beneath the engine, and was adapted to extend over bumps - the opposite of a normal shock action.

Brakes and wheels were also of Buell's own design. The 17-inch wheels were made from polished aluminium, and held broad, sticky Dunlop Elite tyres. Big twin front discs were gripped by four-piston calipers, designed by Buell and built by specialists Performance Machine.

All bodywork was also shaped and created by Buell and his small team from MukWanago, near Milwaukee in Wisconsin. The new fairing blended neatly into the tank/seat unit, while the seat featured a hump that hinged to become a pillion back-rest.

The Harley motor was left internally standard, and was boosted by a SuperTrapp exhaust system that raised its maximum output to about 60bhp at 5000rpm. Typically generous levels of low- and mid-range torque gave effortless acceleration with a twist of the throttle - and the Uniplanar system did a great job of controlling the V-twin's normal vibration. Even when revved hard, the Buell remained pleasantly smooth to a top speed of 120mph.

Equally importantly, the BuelPs compact and well-appointed chassis meant that this was one Harley-engined bike that positively encouraged hard riding on twisty roads. The RS1200's racy steering geometry, excellent frame design and taut forks gave quick steering and flawless high-speed stability, though cornering was compromised slightly by the rather imprecise rear suspension set-up.

Buell's low production levels and labour-intensive assembly kept the RS1200's price high, but for riders who wanted a sporty Harley it was hard to beat. And that position changed in January 1993, when Harley-Davidson, keen to enter the sports bike market officially, bought a 49 per cent stake in Buell's company and raised the levels of investment, production and marketing.

In 1994 the renamed Buell Motorcycle Company launched its first bike, the S2 Thunderbolt - heavily based on the RSI200 but with numerous refinements in styling, power delivery and suspension. The Thunderbolt was a fast, fine-handling and handsome sports bike that was priced more competitively than ever. Boosted by Harley's backing, Buell looked set for an exciting future.

Source Super Bikes by Mac McDiarmid 

Zdroj: http://www.motorcyclespecs.co.za/model/buell/buell_rss_1200_westwind.htm